ELBOW LONG BEND 5D

• 
  

  
  Description of AISI 4130 5D Elbow / 5D Bend

  
  

• 
  
  
  
  • 
    Type: AISI 4130 5D Elbow / 5D Bend
    

    
    Full ranges of fittings from 2″ to 6″ are available with standard pressure ratings of 5,000 psi and 10,000 psi.

    
    
  
  
  • 
    Service Class: Standard / Sour Service
  
  
  • 
    C.W.P. : 7,500 / 10,000 PSI
  
  
  • 
    Test Pressure: 11,250 /15,000 PSI
  
  
  • 
    Material: AISI 4130
  
  
  • 
    Weld Ends: ANSI B16.25
  
  
  • 
    BW Tolerances: ANSI B16.9
  
  
  • 
    Material Yield Strength: 85,000 PSI
  
  
  • 
    Material Tensile Strength: 105,000 PSI
  
  
  
  

• 
  

  
  AISI 4130 5D Elbow / 5D Bend Dimension

  
  

1. 
   Long radius 90° elbows 3D, 5D, and 6D in sizes up to and
   
   including 4” are provided with 4” (102 mm) long tangents,
   
   sizes 5” to 10” are provided with 1D long tangents and
   
   sizes 12” to 24” are provided with 12” (305 mm) long
   
   tangents.


2. 
   End Preparation: Roll-grooved to AWWA C606-04 and or
   
   ISO/FDIS 6182-12. For dimensional tolerances of cast
   
   fittings, refer to ISO/FDIS 6182-12 Table 3.
   

   
    

   
   

   
   Plain-end, beveled end or cut-grooved end are also
   
   available upon request.

   
   


3. 
   Material: standard wall steel pipe to ASTM A53, Grade B.
   

   
   Other materials available on request.

   
   


4. 
   C to E tolerances:
   

   
   2” through 6” : ±⅛” (3.2 mm); 8” through 16” : ±¼” (6.4 mm);

   
   

   
   18” through 24” : ±⅜” (9.5 mm) ; 28” : ±1½” (12.7 mm)

   
   


5. 
   All weights are approximate, based on calculated weight of pipe

MODEL L90-5D WROUGHT 5D 90° ELBOW

L60-5D WROUGHT 5D 60° ELBOW

L45-5D WROUGHT 5D 45° ELBOW

L30-5D WROUGHT 5D 30° ELBOW

L22-5D WROUGHT 5D 22½° ELBOW

L11-5D WROUGHT 5D 11¼° ELBOW

ANSI B16.9 Butt Weld Fittings

Grades – ASTM A420 WPL6, MSS SP WPH-Y52, AISI 4130

Sizes – 2” N.B. to 8” N.B.

Wall Thickness – Sch 80 to Sch XXS

Types – AISI 4130 5D Elbow / 5D Bend, Elbows, Tees, Reducers, Caps, etc.

AISI 4130 5D Elbow / 5D Bend features:

• 
  Eliminates post weld heat treatment requirements that restrict the material’s potential strength.


• 
  Have smooth round uninterrupted bores to minimise pressure drop and turbulence.


• 
  Inherently stronger.


• 
  End fittings machined integrally.


• 
  Do not require costly weld inspection.


• 
  AISI 4130 5D Elbow / 5D Bend with fully pressure tested and certified.


• 
  Full material tractability.

JUAL ELBOW LONG BEND 5D HARGA MURAH. DISTRIBUTOR ELBOW LONG BEND 5D. SUPPLIER ELBOW LONG BEND 5D.

PT. SYNERGY JAYATAMA - DISTRIBUTOR DAN SUPPLIER JUAL FITTINGS - ELBOW - REDUCER - COUPLING - TEE - STUB END - CAP & END CAP - WELDOLET - VICTAULIC COUPLING - HEX HEAD BUSHING - THREADOLET - SOCKOLET - DOUBLE NIPPLE - PLUG - BUTTWELD FITTINGS - BARED TEE